|
| The feeding power in emergency operation | 12 W |
| Working tension/Frequency of a network | AC 220-240 V/50-60 Hz |
| Light source | LED ruler |
| Operating time in emergency operation | 180 minutes |
| Reaction time of emergency operation | <0,25 s |
| Ni-Mh battery | 3,6 V 1 200 mAh |
| Size, mm | 168x40x28 |
| Extent of protection | IP 65 |
| Warranty period of service | 1 year |
|
This set allows to turn any lamp into the emergency. The LED ruler fastens to the lamp near the main sources of light. In case of emergency operation - lighting of the room is carried out by the built-in light source of this power unit.
This set facilitates connection of the block of emergency supply to lamps and doesn't depend on serviceability of lamps of the main lighting. High-quality Ni-Mh maintains the accumulator from 500 to 2000 full cycles of operation of emergency operation. The light indicator of the modes and the button of testing allows to receive information on an operating mode of the block quickly. The case is made of qualitative steel. |
|
| Periodically discharge the battery till the end (power off in a network and allow the battery to be discharged completely). Power off networks when replacing the accumulator. Use for replacement that
the type of the accumulator according to the specification. Don't leave the block within two months without recharge even if it isn't used as it will lead to reduction of service life of the accumulator. Don't allow short circuit of a product. |
Destination
Emergency lighting is designed for lighting of premises after hours. Emergency lighting, depending on the functions performed by them, are separated on evacuation and reserve.
Evacuation lighting can be of several types: the lighting of escape routes, emergency lighting hazardous area and anti-panic lighting (emergency lighting large areas).
On escape routes in addition to fixtures installed safety signs. First of all, evacuation signs showing the direction to emergency exits.
Application area
The premises of newly built and reconstructed buildings and structures for various purposes, places of production work outside of buildings, sites of industrial and agricultural enterprises, railways platforms of companies, external lighting of cities, towns and villages.
Setting
Internal or external mounting on the supporting surface.