Architectural covering of historical objects allows to show all beauty of buildings in evening and night time of day, to emphasize historical value of monuments of architecture and expressiveness of again built buildings.
When developing the concept of architectural lighting use some methods of lighting: general filling in, the local filling-in and accent lighting.
Choose a way proceeding from features of a general architecture.
In this concept of lighting of the building the following receptions and light devices are used:
1) The general filling-in lighting allows to allocate with light all building. This reception allows to minimize intervention in the device of facades of buildings that is especially important during the work with architecture monuments. Thus the blinding action of searchlights is nullified almost thanks to searchlights with special optics and nozzles. The general filling-in lighting is realized usually by means of support of illumination of various height on which a certain quantity of searchlights is established.
At implementation of this project, for illumination of a body of the building and the right projection LED searchlights 150W mark LED SP-150W 6 pcs placed on 4 support (support for external lighting) the balconies aimed at vertical partitioning were used.
The second volume of the building is lit with two LED searchlights of LED SP-300W located at distance of 30 meters and aimed at a point of 10 meters from the region of the building according to each party.
The tower is lit three light-emitting diode to LED SP-150W searchlights at the level of 1-5 floors, two of them are located on a flat roof of shop and light building facades. One more searchlight is on a roof of the main building.
Central entrance: five searchlights of the PRS-50W brand which are located under a canopy at an entrance to the building are used.
2) The local filling-in lighting is applied to allocation of separate parts of a facade, thus devices establish directly on a building facade. The left projection consists of the square support framing an entrance to the building are lit with PRS-50W brand light sources, located on each of columns, aimed up. Quantity of light sources 6 pcs.
Two top floors of a tower are lit with PRS-50W searchlights in number of 8 pieces, a searchlight are aimed down.
3) Accent lighting is used at allocation by light of certain architectural elements, including names and billboards. Over entrance group we offer an inscription to use of searchlights of a dot luminescence of the CD C-12 series in number of 8 pieces.
Finally
