Mobile mobile light complex on the Sirius M chassis for industrial lighting of warehouse and industrial territories of oil refinery, storages Neftekhim of products and other objects with the increased potential of explosion. IP65. It is equipped with the independent generator "HONDA" 2.5 kW. Allows to solve any problems of lighting of territories and objects. Lighting radius 360 g is equipped with 4 (four) halogen spotlights on 500W, the general power of a light stream 2kW. It is established on a moving mast of 4,5-6 m. At the request of the customer it is possible to equip with LED searchlights of LED-SP-200W.
Highly qualitative light-emitting diodes of CREE (USA) firm the International certificate of conformity of Ex dIICT6 IP 67, Ex dIIBT4 are applied. Certificate of the Customs union. Guarantee of 5 years. I and II zones vzryvoopasnostirimeneny: oil fields, oil refineries, sea platforms for oil, gas station, oil storages - chemical: power plants, piers, pump stations, coal mines, military bases, airports, substations, tunnels, etc.
Engine: Honda GX 200;
Engine type: The single-cylinder four-cycle carburetor engine with the top arrangement of valves;
Working volume: 196 cubic cm;
Engine turns: 3000 rpm;
Fuel consumption: 1,5 l/h;
Gasoline tank volume: 14,2 liters;
Operating time without gas station: About 9 hours;
Noise level: 96 dB (A)
Generator: the single-phase;
Tension: 230V;
Frequency: 50 Hz;
Current: 11 A;
Rated power: 2500W ;
Power maximum: 2800W;
Extent of protection: IP65;
Way of regulation of tension: automatic regulator of tension.
Length x Width x Height: 645х435х490 mm;
Destination
LED lighting, placed in hazardous areas indoors and outdoors are made in such a way that their technical implementation is not able to cause an explosion. The explosive environment can not penetrate into the luminaire body and the optical part.
Application area
Facilities and installations of chemical, oil, gas and other industries, where production technology is based on the wide use of liquid, gaseous and dusty flammable and combustible substances with a high level of mechanization and automation of production processes.
Explosive and flammable areas in open areas.
Setting
Direct mounting on the ceiling surface, the load-bearing elements of the premises, for industrial equipment.
Mounting a horizontal or vertical surface by using of suspension elements.