LED lighting intracellular well established in the cultivation of all kinds of poultry: layer, parental herd, repair young growth, broiler.
This type of lighting is designed to fit over the feed trough cells, thus providing uniform light inside the feed chute.
Our lighting system can be installed in any cellular equipment manufacturers, such as: Hartmann, Big Dutchman, Valli, Tehna, Specht, Farmer Automatic, Carre and many others.
LED lighting system for cellular maintenance of the house consists of:
LED lamps 24V;
control cabinet lighting;
power supply - one or two depending on the dimensions of the house;
kit suspension rope and cable and wire products.
LED lamp for cell poultry to 24V, is a tube of clear impact-resistant polycarbonate length 20cm-25cm, inside a polycarbonate tube placed textolite board placed on it with 2 low-power LED company Nichia (Japan). With the ends of the lamp is protected from water and dust tight seals ensuring tightness of the MG series lamp IP68.
Reliable and high-quality LEDs Nichia (Japan) - the service life of 70,000 hours.
The warranty on the lighting system - from 2 to 3 years.
When overall depth of 400 - 600 mm illumination lamp for 2 to 90 lx.
Main specifications:
Color of a luminescence - 2800-3200K (warm white);
Power consumption - 0.4 W at maximum illumination in 100lx;
Scattering angle of 160°;
Supply voltage - 24V;
Depth dimming from 1 ... 100%;
Degree of protection - IP67;
Operating temperature range of - 20C to + 70C;
Dimensions: 200*16*16mm or 250*16*16mm;
Weight - no more than 0,07kg;
Service life - 10 years.
The control cabinet luminaires allows you to set the technological programs covering the entire term of the birds.
Control box, which allows you to quickly and efficiently carry out the switching of lighting lines, each line has a protection and control lighting in three adjustable channels depending on an external signal or a given operator program.
The availability of soft light switch technology allows for stress-free rearing of poultry.
The control cabinet is designed for lighting control in livestock and other production facilities on schedule.
Plastic enclosure with degree of protection IP65.
Circuit-breakers 7 lines of coverage.
Work on the lighting or set a schedule for an external control signal, 0-5; 0-10 V.
Possibility of independent lighting correction on three groups of luminaires.
User-friendly interface with graphic display.
Connects up to 300 controlled LED lamps.
Electricity consumption by using LED lighting is considerably lower than for lighting with conventional incandescent lamps.
On the photo: the power consumption in the house at 18*96 different lighting systems.
Energy consumption for housing 18*96m, 6 batteries, 4 tiers, with maximum illumination is 1.4 kW/h.