| Characteristic | LUX STAR PROM - 60Kw |
| Diameter of a vetrokoles (m) | 17,5 |
| Height of the blade (m) | 8,5 |
| Nominal number of turns (rpm) | 25-30 |
| Rated power of W | 60 000 |
| Maximum power of W | 62 500 |
| Starting speed of a wind | 2,5 m/s |
| Rated speed of a wind | 9 m/s |
| Working speed of a wind | 3-20 m/s |
| Protection against gale-force winds | Automatic |
| Automatic orientation on a wind | Yes |
| Height of a mast (m) | 18 |
| The mass of WPS (without mast) (kg) | 2400 |
| Number of blades | 3 |
| Wind power efficiency | > 0,42 |
| Generator type | Asynchronous three-phase generator |
| Frequency of the generator (Hz) | 0-50 |
| Current from the generator | Variable |
| Rated current (A) | 100 |
| Maximum current (A) | 110 |
| Characteristics of the inverter | Depending on characteristics of system |
| The recommended number of joint stock bank (piece) | 30 |
| The recommended capacity of joint stock bank (A*h) | 200 |
| System effectiveness of transformation | > 0,85 |
| Noise level no more (dB) | 65 |
| Speed limit of a wind | 35 m/s |
Our enterprise specializes on complex implementation of projects with both use of single wind-generating installations by power and wind farms total power. Wind generators are completed depending on needs of the client and from local conditions. The complete set of the autonomous, network or combined stations (the wind generator, solar modules, gas and diesel generators, hydroelectric power station etc.) is possible.
The wind generator is an eco-friendly equipment which doesn't create dangerous radiations, and any hindrances for electric devices. Use of renewable power will allow to lower significantly or completely to exclude expenses on fuel, construction of power lines, planned repair of the equipment. Wind power allows doesn't depend on tariffs, and payments for connection to a network. Service life of wind farms fluctuates from 40 to 45 years, without essential costs of operation.
Basic complete set:
Mast – 1 piece.
The generator – 1 piece.
Rotor – 1 piece.
Blades – 1 set.
Bars – 1 set.
Fixture (assembly set) – 1 piece.
The controler – 1 piece.
Technical data sheet – 1 piece.